Wisefab Rear Subaru Track Race Drop Knuckle Kit:

-1 kg lighter over OEM knuckle / upright
But still maintaining required strength and stiffness

• Rollcenter correction
  -50mm drop from the knuckle / upright
• 2000 - 2007 WRX/STI 72x42x52 wheel bearing needs to be used
  Either 5x100 hub (28462FE001) or 5x114,3 hub (28462FE011) can be used. Both are for STI/WRX 72x42x52 wheel bearing
• Brake caliper tabs moved to upright / knuckle
  In OEM solution the rear brake caliper attached to the dust shield. Wisefab solution provides higher stiffness for brake caliper
• OEM handbrake fitmet
  OEM handbrake can be used, but the brake caliper tabs need to be removed for clearance
• CrMo sphericals
  Traction link bushing replaced with spherical bearing

Kit includes:

• Knuckles with hardware
• Installation guide

Other information:

• Can be used with OEM shock and spring, but bigger benefit can be achieved with lower springs or aftermarket coliovers.
• Original wheel speed sensor can be used
• This knuckle can be used on GC, GD Imprezas and SF, SG Foresters.